Trusted hvac installation for Diamondhead properties. Same-day service available, transparent pricing, and a workmanship guarantee.
A complete HVAC installation from KIC Refrigeration in Diamondhead, MS addresses every element in the comfort chain, from the air handler and condensing unit to the thermostat, ductwork, and filtration system. We ensure proper airflow balance, verified refrigerant charge, tested safety controls, and code-compliant operation before turning the system over to you.
Properties throughout Diamondhead (pop. 9,331) face unique demands when it comes to hvac installation. Mississippi heating loads, cooling calculations, and the insulation levels and duct configurations found in Diamondhead homes all influence the approach we take. KIC Refrigeration tailors every hvac installation project to the conditions your property actually faces — no generic solutions.
Choosing the right contractor for hvac installation in Diamondhead, MS makes all the difference between efficient comfort and a system that short-cycles. KIC Refrigeration uses Manual J load calculations, installs to manufacturer specifications, and backs every project with a warranty. Call (866) 858-2961 to schedule your free assessment.
How our NATE-certified technicians deliver quality hvac installation results from start to finish.
Our Diamondhead estimator walks your property room by room — measuring square footage, checking insulation levels, assessing window area, and inspecting existing ductwork and electrical service. We input all variables into a Manual J load calculation to determine your exact heating and cooling requirements in BTU.
Based on load calculations and your priorities — efficiency, noise level, budget, zoning — we recommend specific equipment and provide a detailed written proposal covering equipment model numbers, SEER2/AFUE ratings, installation scope, warranty, and total cost.
KIC Refrigeration installs HVAC systems in Diamondhead, MS to the highest standards. We set equipment on level, vibration-isolated mounting, braze all refrigerant connections with nitrogen flowing, pressure test with dry nitrogen, evacuate to below 500 microns, charge by weight, seal all duct connections with mastic, and verify gas piping sizing and connections.
Our Diamondhead technician commissions the system by verifying superheat, subcooling, temperature split, static pressure, and gas pressure in heating mode. We program the thermostat, register your manufacturer warranty, label the electrical panel, and walk you through operation and maintenance.
Transparent answers about hvac installation from our certified technicians.
Complete HVAC installation in Diamondhead ranges from $7,000 to $15,000 for a mid-efficiency furnace and AC combination — typically an 80 percent AFUE furnace paired with a 14.3 to 16 SEER2 condenser. High-efficiency systems with variable-speed blowers and two-stage or variable-speed compressors run $12,000 to $22,000 but deliver significantly lower operating costs and qualify for federal tax credits. Heat pump systems fall between $5,000 and $18,000 depending on whether the system is single-stage, variable-speed, or a dual-fuel configuration. Ductwork modifications or new duct runs add $1,000 to $5,000. KIC Refrigeration provides detailed written proposals for Diamondhead homeowners with every cost itemized and no hidden fees.
A standard furnace and AC replacement in Diamondhead takes 1 to 2 days when existing ductwork, gas piping, and electrical service are adequate and the new equipment fits in the same location. A complete system replacement that includes ductwork modifications, new trunk lines, equipment relocation from basement to attic or vice versa, electrical panel upgrades, or zoning system installation may take 3 to 5 days. Multi-zone mini-split installations with 3 to 5 indoor heads typically take 2 to 3 days. KIC Refrigeration provides a clear timeline in every proposal, coordinates scheduling around your Diamondhead home availability, and keeps you informed on progress every step of the way.
Correct HVAC system sizing is determined by a Manual J residential load calculation — the ACCA industry standard — that accounts for your home square footage, ceiling height, insulation R-values, window area and U-factor, air infiltration rate, duct losses, occupancy, and the local MS winter and summer design temperatures. As a rough reference, a well-insulated 2,000-square-foot home in Diamondhead typically needs a 2.5 to 3.5 ton system, while a poorly insulated home of the same size may need 4 tons. KIC Refrigeration never estimates by rule of thumb — we run a proper calculation for your specific Diamondhead home to avoid oversizing, which causes short cycling, high humidity, and premature compressor wear.
Yes, substantially. Replacing a 10 SEER air conditioner with a 16 SEER2 unit reduces cooling energy consumption by approximately 38 percent. Upgrading from an 80 AFUE furnace to a 96 AFUE condensing furnace saves 16 cents of every heating dollar — the old furnace sends 20 cents up the flue while the new one captures it. Combined with proper installation practices — correct refrigerant charge verified by superheat and subcooling, proper static pressure and airflow at 400 CFM per ton, sealed duct connections, and a programmable thermostat — a new system typically saves Diamondhead homeowners $600 to $1,800 per year depending on home size, usage patterns, and local energy rates.
Hear from property owners who chose us for their heating and cooling needs.
"AC repair was fast and fairly priced. The compressor was failing and they had the part on the truck. Done in about ninety minutes."
"KIC Refrigeration has serviced our commercial HVAC system for two years now. Always professional, always on time. Would not trust anyone else."
"Mini split installation went smoothly. Clean work, no mess left behind. Would have liked a bit more explanation on the maintenance schedule but overall very happy."